Ph: +44 20 3432 4118 info@mech-elec.net
Volume, Fire & Smoke Dampers
Back Draught Dampers
The BD Series Backdraught Damper is self-opening subject to air velocity and is designed to restrict air back flow.The damper can be fitted to partitions or brick walls, on plenums or duct mounted.
Features
• Standard case construction is galvanised mild steel
• Extruded aluminium blades
• Flange or spigot casing options
• Infinite sizing capability
• Unique blade end seal and stop
• Variable blade position for alternate airflow direction
Specifications & Tests
• Unless otherwise stated, flange models are suitable for classes A & B of DW144, with spigot models being suitable for A, B and C of DW144.
• Conforms to HVCA specification DW144 classes A and B, and Eurovent as relevant.
• Independent performance tests for pressure drop. Test report 165 refers.
Blade Detail
The nominal 60mm wide standard extruded aluminium blades are fitted onto 6.25mm diameter spindles, complete with blade edge brush seal fitted as standard. All blades are fitted for parallel operation only.
Blades are linked with a precise linkage, alleviating movement and subsequent rattling of individual blades. Refer to pressure drop figures for suitability.
Avoid use of dampers in extremely turbulent duct conditions. Although blade linkages will stabilise blades in most conditions, abnormal circumstances may cause damper malfunction.
